Level 8, UTC Bhaban, 8, Panthapath, Kawran Bazar, Dhaka-1215
SaT - Wed: 9:00 am to 5:00 pm | Thu 02:00 pm

Quality Management in Dyeing and Printing

Home - Courses - Quality Management in Dyeing and Printing

Categories

Latest Posts

Quality Management in Dyeing and Printing

Course type: Basic

Course Duration: 80 hours

Classes: 16 classes in 1 month

Course Objectives:

  1. This course is specially designed to provide technical knowledge and skills to cope with the requirement of Quality Control of the Dying and Printing Process of Textile Sector. The course will be implemented to ensure at least 80% of total contact hours on practical/hands on skills training or practice and 20% trade/ occupations related theory including OHS and soft modules.
  2. The course is designed to enable trainees to acquire a range of technical and vocational, practical, personal and organizational skills valued and utilized both within and beyond the workplace.
  3. The course is designed to meet the required competencies of the occupations needed in the labor market in and outside the country.

Course Outline

Name of the Course

Duration of Course

Entry Qualification

Quality Management in Dyeing and Finishing

Total Duration = 80 hrs
1. Generic Skills= 2 hrs
2. Occupation Specific knowledge(trade theory) =14 hrs
3. Occupation Specific Skills(practical/demonstration)= 64 hrs
1. Age minimum = 18 yrs

2. Education = SSC (Fill up from Main Sheet) passed

I.Requirement of Competencies for the Targeted Occupations in the Job market

  1. Primary Knowledge on Dyeing & Printing
  2. Knowledge on Dyeing Faults and Printing Problems
  3. Knowledge on Quality Parameters of Dyeing and Printing

II. Competency Level: Medium-Skilled Worker Level 2
III. Student Assessment Method

  1. Class Test( oral & practical based on achievement of competencies , once every 7 days)
  2. Monthly Test( oral & practical, once every 30 days)
  3. Final Test ( oral and practical based on achievement of competencies outlined for the course )
  4. Final Test to be conducted by Industry Assessors and institutional Trainers to assess the skills received during training

IV. Industry Assessor Requirements
Assessor to conduct assessment must meet the following requirements

  1. Trainer (from other institution) or practitioner in the trade area at least for five(5) years
  2. Trainer(from other institution) or practitioner should be certified by BTEB/ISC/industry association (BTMA)
  3. One assessor can assess maximum 6 (six) Trainees a day

V. Certification System

  1. Certification will be done based on the assessment report from Industry Assessors and marks obtained from weekly, monthly and final test /assessment.

Time Distribution

Module No

Job Focused Module

Allocated Time(Contact Hours)

Occupation Specific Knowledge (trade theory) in hrs

Occupation Specific Skills(Practical) in hrs

Total in hrs

1. Introduction and Importance of Quality Management in Dyeing and Printing

2

8

10

2. Dyeing and Dyeing Faults

2

8

10

3. Printing and Printing Faults

3

12

15

4 Online Quality Control System

3

12

15

5 Fastness Properties

3

12

15

6 Quality Assurance in Printing

3

12

15

Time allocation

20%

80%

100%

Weekly Assessment

30 Mins

30 Mins

4.0 Hrs

Final Assessment

1 Hour

1.5 Hour

2.50 Hours

Total hrs

80.50 Hours

Module 1: Introduction and Importance of Quality Management in Dyeing and Printing 
Total Duration: 10 Hrs

Sl No Unit Code Unit of Competency (UoC)Title UoC Level Nominal Duration in hrs
Generic- Compulsory
SIEP-QDP-001 Idea on OHS practice in Dyeing and Printing floor 30 mins
SIEP-QDP-002 Acquaintance with Technical Terms used in Dyeing and Printing 30 mins
Occupation Specific Knowledge(trade theory) -Compulsory
SIEP-QDP-003 Generalized Knowledge on Quality Management 15 mins
SIEP-QDP-004 Idea on Importance of Quality Management in Dyeing and Printing 45 mins
Occupation Specific Skills(practical/demonstration)- Compulsory
SIEP-QDP-005 General Idea of different Dyeing Machines 4.0 hrs
SIEP-QDP-006 General Idea of different Printing Machines 4.0 hrs

Module 2: Dyeing and Dyeing Faults
Total Duration: 10 Hrs

Sl No Unit Code

Unit of Competency (UoC)Title

UoC Level Nominal Duration in hrs
Generic Compulsory
SIEP-QDP-007 Idea on Safety Measures for Dyeing Floor 30 mins
Occupation Specific Knowledge(trade theory) -Compulsory
SIEP-QDP-008 Knowledge of Water Hardness, Standard Water Quality for Dyeing 30 mins
SIEP-QDP-009 Comprehensive Idea on Reactive Dyeing and Associated Faults 30 mins
SIEP-QDP-010 General Idea on Disperse Dyeing and Associated Faults 30 mins
Occupation Specific Skills(practical/demonstration)- Compulsory
SIEP-QDP-011 Controlling points of Reactive Dyeing of Cotton Fabric 4 hrs
SIEP-QDP-012 Skills of Identifying Shade Variation 4 hrs

Module 3 Printing and Printing Faults
Total Duration: 15 Hrs

Sl No Unit Code

Unit of Competency (UoC)Title

UoC Level Nominal Duration in Hrs
Occupation Specific Knowledge( Trade theory) -Compulsory
SIEP-QDP-013 Idea on Different Types of Printing Machines 1:30 hr
SIEP-QDP-014 Idea on Different Methods of Printing and Associated Faults 1:30 hr
Occupation Specific Skills(practical/demonstration)- Compulsory
SIEP-QDP-015 Working with the Controlling Points of Flat Screen Printing 4 hrs
SIEP-QDP-016 Working with the Controlling Points in Roller Screen Printing 4 hrs
SIEP-QDP-017 Working with the Controlling Points in Discharge and Resistive Printing 4 hrs

Module 4: Online Quality Control System 
Total Duration: 15 Hrs

Sl No Unit Code

Unit of Competency (UoC)Title

UoC Level Nominal Duration in Hrs
Occupation Specific Knowledge(trade theory)-Compulsory
SIEP-QDP-018 Idea about the production parameters of dyeing e.g. Temperature, pH, M/L ratio, water and chemical recipes 1:30 hr
SIEP-QDP-019 Understanding of Quality Control Points of Dyeing and Printing 1:30 hr
Occupation Specific Skills(practical/demonstration)- Compulsory
SIEP-QDP-020 Understanding of Recipe Calculation Method 6 hrs
SIEP-QDP-021 Skills of Shade Variation Inspection 6 hrs

Module 5: Fastness Properties
Total Duration: 15 Hrs

Sl No Unit Code

Unit of Competency (UoC)Title

UoC Level Nominal Duration in hrs
Occupation Specific Knowledge(trade theory) -Compulsory
SIEP-QDP-022 Wash Fastness to Color 45 mins
SIEP-QDP-023 Light Fastness to Color 45 mins
SIEP-QDP-024 Rubbing Fastness 45 mins
SIEP-QDP-025 Perspiration Fastness 45 mins
Occupation Specific Skills(practical/demonstration)- Compulsory
SIEP-QDP-026 Wash Fastness Test 4 hrs
SIEP-QDP-027 Rubbing Fastness Test 4 hrs
SIEP-QDP-028 Perspiration Fastness Test 4 hrs

Module 6: Quality Assurance in Printing
Total Duration: 15 Hrs

Sl No Unit Code

Unit of Competency (UoC)Title

UoC Level Nominal Duration
Occupation Specific Knowledge(trade theory)-Compulsory
SIEP-QDP-029 Understanding of Quality of Thickener and Binder 1.30 hr
SIEP-QDP-030 Parameters to Check in Printing 1.30 hr
Occupation Specific Skills(practical/demonstration)- Compulsory
SIEP-QDP-031 Skills of Quality Checking of Printed Fabrics 6 hrs
SIEP-QDP-032 Idea on All-over printing 6 hrs

List of Jobs to Achieve UoC

Name of the Job to Achieve UoC

Time Allocated for each Job

Time of implementation

1. Identification of Different Dyeing and Printing Machines 3.0 hrs 1st week
2. Standard Water Quality for Dyeing 30 min 1st week
3. Reactive Dyeing Process and Associated Faults Identification 1.5 hr 1st week
4. Quality Controlling Points in Reactive Dyeing 2.0 hrs 2nd week
5. Shade Variation Inspection 1.0 hr 2nd week
6. Working with Quality Controlling Points of Screen & Roller Printing Machines 3.0 hrs 3rd week
7. Working with Discharge and Resistive Printing 1.0 hr 3rd week
8. Working with the Production Parameters like pH, Temperature, M:L Ratio and Recipes 2.5 hrs 3rd week
9. Fastness Properties and Test methods 5.0 hrs 4th week
10. Working with Quality Checking of Printed fabrics 3.0 hrs 4th week

Share

Comments (2)
arif / January 16, 2018

Idea about the production parameters of dyeing e.g. Temperature, pH, M/L ratio, water and chemical recipes

Reply
Engr. Syed Rowshan Ali / January 16, 2018

Dear Mr. Arif,
Your comments is not clear, would you like to explain it please?

Reply

Leave A Comment