Level 8, UTC Bhaban, 8, Panthapath, Kawran Bazar, Dhaka-1215
SaT - Wed: 9:00 am to 5:00 pm | Thu 02:00 pm

Working With Garments CAD

Home - Courses - Working With Garments CAD

Categories

Latest Posts

Working With Garments CAD

Course type: Basic

Course Duration: 80 hours

Classes: 16 classes in 1 month

Course Objectives:

  1. This course is specially designed to provide technical knowledge and skills to cope with the requirement of Computer Aided Design of Apparel Section of Textile Sector. The course will be implemented to ensure at least 80% of total contact hours on practical/hands on skills training or practice and 20% trade/ occupations related theory including OHS and soft modules.
  2. The course is designed to enable trainees to acquire a range of technical and vocational, practical, personal and organizational skills valued and utilized both within and beyond the workplace.
  3. The course is designed to meet the required competencies of the occupations needed in the labor market in and outside the country.

Course Outline

Name of the Course

Duration of Course

Entry Qualification

Quality Control in Knitting Total Duration = 80 hrs
1. Generic Skills= 2 hrs
2. Occupation Specific knowledge(trade theory) =14 hrs
3. Occupation Specific Skills(practical/demonstration)= 64 hrs
1. Age minimum = 18 yrs

2. Education = SSC/HSC passed

I. Requirement of Competencies for the Targeted Occupations in the Job market

  1. Primary Knowledge on Different Garments CAD System
  2. Knowledge on Lectra Modaris Software
  3. Knowledge on Diamino Software

II. Competency Level: Basic Skilled Worker Level 1/Medium-Skilled Worker Level 2
III. Student Assessment Method

  1. Class Test( oral & practical based on achievement of competencies , once every 7 days)
  2. Monthly Test( oral & practical, once every 30 days)
  3. Final Test ( oral and practical based on achievement of competencies outlined for the course )
  4. Final Test to be conducted by Industry Assessors and institutional Trainers to assess the skills received during training

IV. IndustryAssessor Requirements
Assessor to conduct assessment must meet the following requirements

  1. Trainer (from other institution) or practitioner in the trade area at least for five(5) years
  2. Trainer(from other institution) or practitioner should be certified by BTEB/ISC/industry association (BTMA)
  3. One assessor can assess maximum 6 (six) Trainees a day

V. Certification System

  1. Certification will be done based on the assessment report from Industry Assessors and marks obtained from weekly, monthly and final test /assessment.

Time Distribution

Module No

Job Focused Module

Allocated Time(Contact Hours)

Occupation Specific Knowledge (trade theory) in hrs

Occupation Specific Skills(Practical) in hrs

Total in hrs

1. Introduction to Apparel CAD System

4

16

20

2. Working with Lectra Modaris

6

24

30

3. Working with Lectra Diamino

6

24

30

Time allocation

20%

80%

100%

Weekly Assessment

30 Mins

1 Hours

4.5 Hours

Final Assessment

30 Mins

2 Hours

2.5 Hours

Total hrs

80.00 Hours

Module 1: Introduction to Apparel CAD System
Total Duration: 20 Hrs

Sl No Unit Code Unit of Competency (UoC)Title

UoC Level

Nominal Duration in hrs
Generic- Compulsory
SIEP-WGC-001 Apply technical terms in the workplace Level 1,
Level 2

40 Minutes

Occupation Specific Knowledge(trade theory) –Compulsory
SIEP-WGC-002 CAD and CAM Level 1,
Level 2

50 Minutes

SIEP-WGC-003 Necessary Hardware and Software Level 1,
Level 2

50 Minutes

SIEP-WGC-004 Available CAD for Apparel Industry Level 1,
Level 2

50 Minutes

SIEP-WGC-005 Comparative Study on Different Brands Level 1,
Level 2

50 Minutes

Occupation Specific Skills(practical/demonstration)- Compulsory
SIEP-WGC-006 Introduction to Lectra Workplace Level 1,
Level 2

16 Hours

Module 2: Working with Lectra Modaris
Total Duration: 30 Hrs

Sl No Unit Code

Unit of Competency (UoC)Title

UoC Level Nominal Duration in hrs
Generic Compulsory
SIEP-WGC-007 Understanding Technical Terms regarding Garments CAD Level 1,
Level 2

0.40

Occupation Specific Knowledge(trade theory) –Compulsory
SIEP-WGC-008 Understanding Size Table, Style and Layer Level 1,
Level 2

0.40

SIEP-WGC-009 Working with Line Tools Level 1,
Level 2

0.40

SIEP-WGC-010 Working with Points and Curves Level 1,
Level 2

0.40

SIEP-WGC-011 Working with Sewing Allowance Level 1,
Level 2

0.40

SIEP-WGC-012 Grading Basics Level 1,
Level 2

0.40

SIEP-WGC-013 Working with Grading Level 1,
Level 2

0.40

SIEP-WGC-014 Piece extraction, Doubling Level 1,
Level 2

0.40

SIEP-WGC-015 Creating Variant and Exporting Level 1,
Level 2

0.40

Occupation Specific Skills(practical/demonstration)- Compulsory
SIEP-WGC-016 Understanding the User Interface Level 1,
Level 2

3.0

SIEP-WGC-017 Understanding Size Table, Style and Layer Level 1,
Level 2

3.0

SIEP-WGC-018 Working with Line Tools Level 1,
Level 2

3.0

SIEP-WGC-019 Working with Points and Curves Level 1,
Level 2

3.0

SIEP-WGC-020 Working with Sewing Allowance Level 1,
Level 2

3.0

SIEP-WGC-021 Grading Basics Level 1,
Level 2

3.0

SIEP-WGC-022 Working with Grading Level 1,
Level 2

3.0

SIEP-WGC-023 Piece extraction, Doubling Level 1,
Level 2

1.30

SIEP-WGC-024 Creating Variant and Exporting Level 1,
Level 2

1.30

Module 3: Working with Lectra Diamino
Total Duration: 30 Hrs

Sl No Unit Code

Unit of Competency (UoC)Title

UoC Level Nominal Duration in Hrs
Occupation Specific Knowledge( Trade theory) –Compulsory
SIEP-WGC-025 Understanding Technical Terms regarding Diamino, User Interface and Access Path Level 1,
Level 2

6.0

Occupation Specific Skills(practical/demonstration)- Compulsory

SIEP-WGC-026 Defining Access Path and Importing Variant Level 1,
Level 2

6.0

SIEP-WGC-027 Marker Configuration in Diamino Level 1,
Level 2

6.0

SIEP-WGC-028 Manual Marker Making in Diamino Level 1,
Level 2

6.0

SIEP-WGC-029 Automatic Marker Making in Diamino Level 1,
Level 2

6.0

List of Jobs to Achieve UoC:

SL

Name of the Job
to Achieve UoC

Time Allocated
for each Job

Time of implementation

1.

Understanding the User Interface

1.0

1st Week

2.

Understanding Size Table, Style and Layer

2.0

1st Week

3.

Working with Line Tools

2.0

2nd Week

4.

Working with Points and Curves

2.0

3rd Week

5.

Working with Sewing Allowance

0.5

4th Week

6.

Grading Basics

1.5

4th Week

7.

Working with Grading

2.0

5th Week

8.

Piece extraction, Doubling

1.0

6th Week

9.

Creating Variant and Exporting

1.0

6th Week

10.

Defining Access Path and Importing Variant

1.0

7th Week

11.

Marker Configuration in Diamino

1.0

7th Week

12.

Manual Marker Making in Diamino

1.5

7th and 8th Week

13.

Automatic Marker Making in Diamino

1.5

8th Week

Share

Leave A Comment